Thursday, 4 August 2016

Borehole and the use of correct materials

Wao! I say that because it feels good to be back writing here again giving ot useful information about
Five inch borehole casing
boreholr drilling and the use of correct and adequate materials.

I have been drilling borehole in lagos Nigeria for a lot of years now, since 2002 and the kind of complaint about the use of fake materials by some quacks parading as engineers is very disheartening.
This is the reason for my coming out from the trenches to inform all yo good people out there so yo don't fall victim..

                               
                                            The important BOREHOLE material you need to know.
Apart from drilling to proper aquifer, which is not alway about debt like i mentioned in some previous post, the most important material is

no 1, Casing.  Your casing is the foundation of your borehole. If this is wrong, then you dont even have anything.
Casing size ranges between 4 to 10 inches.
Thickness is between 3mm to 8mm for the plastic casing.
But the size is not nearly as important as the thickness.

                     
For your average domestic borehole Five inch casing is the standard, except in some very rare instances.
And the thickness of the casing should be at least 5mm thick considering the dept of the hole.

Meanwhile, there are so many bad casings out there not suitable for borehole. i dont want to call the names of this casings. But your average borehole engineer should know the difference.
The two best that i still use are Karishma and Lumbard casings

Watch out for the concluding part of this post next time..

For good and affordable borehole project,
contact

DEEP WATER DRILLING SERVICES
08035204171       07042236771
five inch borehole casing
 

No comments:

Post a Comment